PBR and Class based routing help

[nastyman]

Hi,

I need to prioritize traffic depending on the protocol.
I know I can do this by using class-maps and PBR.
However we have some non-standard ports that we use in addition to the normal ones.

Is there a way to define your own ip protocols when using the
match protocol command?

e.g.

class-map http
match protocol http

clas-map custom
match protocol ?

Many Thanks
Mark

 

[stanpci]

Mark,

What you probably can use is Cisco's NBAR feature. See the following link for more info:

http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080094ac5.shtml

stanpci

 

[nastyman]

Looks like that's exactly what I'll need!

Thanks stanpci