PAT issues.

[PGRAYSON]

Currently using a PIX to manage inbound access to a network quite securely. All hosts have 172.22.xx.xx style addresses and therefore those being accesses are NATed.

The problem is that I want to divert traffice destined for a particular port on one NATed box to the same port on another machine.

I've tried setting it up via the PDM but the rule just simply doesn't work. Could this be because there are already other translation rules in place for these two devices?

 

[themut]

You need to use the port redirection feature on the PIX, use the link below as a guideline:

http://www.cisco.com/en/US/products...oducts_tech_note09186a0080094aad.shtml#topic9

 

[PGRAYSON]

Found the problem - there's an existing NAT rule in place to translate the traffic outbound from this device, and adding a new rule conflicts with this.