Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Password reset 1

Status
Not open for further replies.

Revolution1200

Programmer
Sep 29, 2005
143
GB
Hi,

not sure if this is allowed to be answered...

I need to reset the layer 2 password in an Opt 11. I am logged into the switch with layer one, I have the opt 11 in password override mode, and I'm logged into the PDT.

when trying to reset the password using the correct command, it is asking for level2 pwd as per the book, but will not accept the override password in here.

Can anyone point me in the right direction?

This is a test system.
 
Any password request questions shouldn't be discussed on this forum and I do understand your problem, but it's best if your issue is discussed away from here.

Also there are a number of other questions and facts that you need to be aware of such as current software version etc. This is because different methods are used.

All the best

Firebird Scrambler
Meridian Programmer in the UK

If it's working, then leave it alone!.
 
Thanks Firebird,

That is what I feared - Dont even have the 4.5 software on a card or I would have re-installed.

Stuart
 
Hi Firebird,

could you give me a clue through

Either that or I have one smart heater with lots of LED's!

trautskralc~[AT]~hotmail~[DOT]~com

Thanks

Stuart

 
read the security document in your document collection. It has detailed procedure for reset pwd.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top