Password Legend 6.0 Version 11

[Ratster]

Does anyone know the back door password to a Merlin Legend Releas 6.0 V11? I can connect through WinSpm with no problem but the craftr4 password I was given does not work. Is there another?

 

[ken07734]

You need to go on site and connect your laptop then change the password.

 

[Ratster]

Due to the fact that this is at craft level, will I be able to change it? In other words if craftr4 does not work locally can I modify it? If so, how?

Thanks

 

[campyracr]

You cannot change a password remotely.

 

[Ratster]

But I will be able to change it if I get on-site? Do you happen to have an intructional guide? At the on-site location I have an Intuity Map5 with an Sat console that I can toggle between the Legend and the Intuity.
I am a Definity guy not a Legend

Anything you can give me is much appreciated.
Thanks

 

[ken07734]

At the main menu you will see the password choice. hit that and enter anew password 6 digigts only, you shouldn';t have to hit retuen when done after the 6th number or letter it should go back to the menu.
YOU MUST BE ONSITE TO DO THIS WITH A LAPTOP.

 

[ken07734]

correction, 7 digits only.

 

[ken07734]

You can change it remotely, but if you do not know the old one you can't do it.

 

[Ratster]

Thanks Ken I'll give it a try

 

[chcoale]

Hi,
Print a system setup report. You will have to be on site to do this. The password will be on the first page, right hand side about halfway down.

Charlie Coale
301-352-3601