Passport 8010 one way mirror ?

[Kjartan]

I´m trying to mirror a port on a Passport 8010 but manage only to get traffic one way.

am using:
diag mirror-by-port 1 create in-port 1/34 out-port 1/35
diag mirror-by-port 1 mode both

Box version:
# box type : Passport-8010
# software version : 3.1.0.0
# monitor version : 3.1.0.0/018

Any one know if this is a bug and whether upgrading solves this?

 

[Kjartan]

Ok, found a posting stating that one needs an Enhanced version blade, guess I dont have one and that be the reason.

 

[Wookie27]

Yes you are right the newer enhanced modules end with a E on the card number eg: 8648E.. this will allow ingress & Egress port mirroring

 

[fabianoboscatto]

I don´t remember, but i think version 3.2.0 allows you to mirror i/o traffic. Does not matter if the blade is Enhanced

 

[Jynxx]

Yep...you still need the E version blades.

 

[es959]

I have found a limitation of 10 with the Passport model/ver/release that I am using....see below where I setup 9 different ports to be monitored to one port.

What did you find?

diag mirror-by-port 1 create in-port 7/32 out-port 7/24
diag mirror-by-port 1 mode both
diag mirror-by-port 2 create in-port 1/1 out-port 7/24
diag mirror-by-port 2 mode both
diag mirror-by-port 3 create in-port 1/2 out-port 7/24
diag mirror-by-port 3 mode both
diag mirror-by-port 4 create in-port 1/3 out-port 7/24
diag mirror-by-port 4 mode both
diag mirror-by-port 5 create in-port 1/4 out-port 7/24
diag mirror-by-port 5 mode both
diag mirror-by-port 6 create in-port 1/5 out-port 7/24
diag mirror-by-port 6 mode both
diag mirror-by-port 7 create in-port 1/6 out-port 7/24
diag mirror-by-port 7 mode both
diag mirror-by-port 8 create in-port 1/7 out-port 7/24
diag mirror-by-port 8 mode both
diag mirror-by-port 9 create in-port 1/8 out-port 7/24
diag mirror-by-port 9 mode both