Passing name display to Avaya

[TimAbney]

We have an option 81C with ties to an Avaya system and we want to try passing name display. We have a test PRI between the two sites at our disposal. Does anyone know how to accomplish this? RDB D-channel config etc? Thanks for your help.

 

[srtelengine]

You will want to program your dch as qsig. Does the avaya support qsig trunking? With qsig you pass everything and let the avaya strip out what it needs.

 

[captaingadget]

I believe CPND is a specific to Nortel so it is unlikely to work.

 

[telebub]

No, using QSIG it will work.

War Eagle!
Lions Baseball '09!

 

[TimAbney]

Does it have to be QSIG or will NI2 work with NDx?

 

[telebub]

I guess it is possible but I haven't tied a Nortel to another system with NI-2. I have tied Nortel to Asterisk, Nortel to Cisco, and Nortel to Avaya with QSIG. It usually works well. The IFC I have used on the DCH and Route is ISGF. I currently don't have a Nortel/Avaya integration or I would post the setup. The Nortel/Avaya integration I setup a couple of years agao was a beta trial that was only in service for 6 months and pulled out.

War Eagle!
Lions Baseball '09!