Passing calling # through on a call forward

[MyHeadHurts]

Presently I have numerous DID's that I am forwarding to outside numbers. I would like to know if there is a way to pass through the actual calling party number on the call forward rather than having the forwarding phone CID show up.

 

[bigindian65]

too many to burn lics in software and the DID be the forwarding set/number?

Mato' Was'aka

 

[MyHeadHurts]

BigIndian...I don't understand your reply. Could you elaborate a little more?

 

[bigindian65]

actually build a set in software, cfxa flxa (so it doesnt disable if 30 in midn) set hunt and fdn to external number.

Mato' Was'aka

 

[MyHeadHurts]

The DID's that I'm forwarding are Phantom's.
Here is the setup of one of these phantoms:

DES
TN 064 0 02 12 PHANTOM
TYPE 500
CDEN 4D
CUST 0
DN 2153 0 MARP
AST NO
IAPG 0
HUNT 91XXXXXXXXXX
TGAR 8
LDN NO
NCOS 5
SGRP 0
RNPG 0
XLST
SCI 0
SCPW
CLS CTD DTN FBD XFD WTA THFD FNA HTA ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD CCSD LND TVD
CFTD SFD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
MCRD SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD PGND FTTC
RCO 0
PLEV 02
AACS NO
FTR FDN 91XXXXXXXXXX
FTR DCFW 12 91XXXXXXXXXX
DATE NO DATE

Anything I can do in this setup (or somewhere else) to make it so the XXXXXX2153 DID doesn't show on someone's CID but rather the calling number that is being forwarded?

 

[bigindian65]

sorry misunderstood. I don't think so, but maybe I'm wrong and someone else will be right.

Mato' Was'aka