I have a Partner Endeavor with a processor and 3 206s
I am getting a high pitched noise.
I have gone as far as pulling all the lines and ext.
I have pulled all the 206s in a variety of combinations
I checked the outside lines and there is no noise on them.
I have changes the power source all with the same results. The noise continues.
One thing that is odd in that Extensions connected to the processor and 2 of the 206s have the noise where 1 of the 206s on bank 2 does not experience the noise.
Any ideas on how to T-Shoot any further.
Thanks,
Jake
I am getting a high pitched noise.
I have gone as far as pulling all the lines and ext.
I have pulled all the 206s in a variety of combinations
I checked the outside lines and there is no noise on them.
I have changes the power source all with the same results. The noise continues.
One thing that is odd in that Extensions connected to the processor and 2 of the 206s have the noise where 1 of the 206s on bank 2 does not experience the noise.
Any ideas on how to T-Shoot any further.
Thanks,
Jake