Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Partner II
- Thread starter Ken1960
- Start date
TouchToneTommy
Vendor
Partner Mail interfaces through line cords connected to extension ports on 206 modules in the Partner II.
On a 2 or 4 port Partner Mail, only the last port is used for setting the Message Waiting lights. 6 port uses the last 2.
Check for dial tone and proper operation of all the VM ports, but especially that last one.
On a 2 or 4 port Partner Mail, only the last port is used for setting the Message Waiting lights. 6 port uses the last 2.
Check for dial tone and proper operation of all the VM ports, but especially that last one.
It TTT's suggestions don't work, also check the phone to make sure the message lite hasn't burned out. You can do a lite/ringer test by holding down the # button for at least 5 seconds and then lift the handset. Hang up the handset to end the test.
Brian Cox
Oregon Phone
Brian Cox
Oregon Phone
- Status
Similar threads
- Question
- Locked
- Question