Partner ACS 5.0 Continuous Replace Sys Battery Msg

[kbromschwig]

I have a Partner ACS 5.0 procesor. Today, at extensions 10 and 11, there is a mesage that displays: replaceSysBat w/power on. I reaplced the 2 AAA batteries and the message did not go away. So I put 2 different batteries in the module, and still the mesage will not ago away. I checked and both batteries have 1.5 volts on them. So I turned off the power to the ACS system for a moment, and the entire system lost its memory. I was able to restore using the PCMCIA card, but there appears to be no battery system in here anymore. Any ideas???? Thanks...Kurt

 

[mforrence]

Clean the battery case connections - there is likely a poor connection.
Mike

 

[kbromschwig]

Well, you are correct, there was some corrosion in there. It now works. No further replies are needed...Thanks