biggiedave
Technical User
my extensions are freeking out, they work for a while then go dead or if i am in mid call it sounds like the asterk key is being held down.
here is how i set it up.
1, equipment partner 2 processorver 3.0, a 206e 3.1 and a 206e 3.0 and a 5 slot carrier
2,being the phone companys acess box was 4 feet away from the system i ran 3 telephone lines 4 wire each to lines 1,2,and 3
3' in the carrier it is set up as follows center slot is processor, solt 1 "first on left" and slot 2 have the 206e in them,
4, i already replaced the processor thinking it was bad.no luck
5,all the extensions from the 206's i am using a standard phone line to the extensions.
6, i never have any problems with 1 extension that has the 3 line cordless mls-16 i think
other phoned are mls 12-d's
i have swapped phones they work for a few minuts then the same thing keeps happening.
do i need to clean out programming or set up programming as part of set up?
thank you all in advance.
here is how i set it up.
1, equipment partner 2 processorver 3.0, a 206e 3.1 and a 206e 3.0 and a 5 slot carrier
2,being the phone companys acess box was 4 feet away from the system i ran 3 telephone lines 4 wire each to lines 1,2,and 3
3' in the carrier it is set up as follows center slot is processor, solt 1 "first on left" and slot 2 have the 206e in them,
4, i already replaced the processor thinking it was bad.no luck
5,all the extensions from the 206's i am using a standard phone line to the extensions.
6, i never have any problems with 1 extension that has the 3 line cordless mls-16 i think
other phoned are mls 12-d's
i have swapped phones they work for a few minuts then the same thing keeps happening.
do i need to clean out programming or set up programming as part of set up?
thank you all in advance.