partical routing (rerouting in network) ??

[mdfan]

Hi
Does anyone know if Ericsson plans to implement this in SP:s of BC11 or BC12 ?



Duvel

 

[mdfan]

anyone ??

 

[whosrdaddy]

Duvel, can you be a bit more specific? an example or so?

Greetings,

http://www.damovo.com

 

[mdfan]

MD evolution from Telcom Europe supports it.
With Partical routing you don't get trombone effect at mobile extension or external follow me. Also the call is terminated at b-party within the same network as the origin and hence original a-number is shown at b-party without need of no screening in the public network.

 

[lalrl]

what you mean is the feature "partial rerouting". It is not supportet in BC11 SP10 or older. In my understandig it is a better external calldiversion without using B-Channels from PSTN to PABX.

 

[whosrdaddy]

Isn't this feature called path replacement?
like A calls B, B calls C and transfers A to C, at this moment a new call is setup from A to C and the trunks to B are released.

is this on topic or not?

greetings,

http://www.damovo.com

 

[mdfan]

Path Replacement is the same as optimized routing ?

Partical ruting is when an incoming call towards the PBX is rerouted out again towards an external destination without the call rerouted being originated in the PBX , that is it remains in the public network .
This way you have no trombone effect and sending of original a-number (without the need of no screening) is possible.

 

[whosrdaddy]

It think it is possible via path replacement if A and B party are MD110's

http://www.damovo.com

 

[mdfan]

But normally A comes externally, PSTN or Mobile.

 

[uts1111]

BC12 release in few months time...

 

[mdfan]

Do you know if it will be implemented there ?