Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Parm Setting After Upgrade

Status
Not open for further replies.
rookie13

rookie13

Technical User
Nov 2, 2006
107
US
I just upgraded an Opt61c from 25.40 to 4.5 with CP4 CPU. I forgot what needs to be change in the Parameter after the upgrade. I believe it is for the buffer but not sure with ones. Can anyone please let me know?

TIA
 
Sort by date Sort by votes
look in the engineering and planning guide to determine what the buffer should be set at.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question
Busy tone after hangup
Replies
1
Views
114
MoJHK
MoJHK
AShammah
  • Locked
  • Question
Spectralink/Nortel 2210/2211 Firmware upgrade
Replies
0
Views
108
AShammah
AShammah
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
113
bltodd
bltodd
bigdave1980
  • Locked
  • Question
Option 11 system problems after power disturbance
Replies
9
Views
206
bigdave1980
bigdave1980
26th Pair
  • Locked
  • Question
CS1000: Can't logout of Sig Server after Time Change
Replies
2
Views
114
26th Pair
26th Pair

Part and Inventory Search

Sponsor

Back
Top