PARAMETERS EXCEEDS ONE LINE

[wfhy]

MD110 ALEX SAYS AS FOLLOWS:

When a command with its parameters exceeds one line in length, the line is terminated by a complete parameter value followed by a comma (,). After pressing the <CR> key the command can be continued.

Now I want use
CLFOC:FORM=4,DATA=1-3M&........&27-9T;
but only one line is vialid. Who can tell me how to do.

 

[fouesnant]

Hi

Continue with a new line
CLFOC:FORM=4,DATA=....,APPEND=YES;

This parameter APPEND autorize you to add more information to the FORM that exceed the line lenght.
AS far as I know it is the lonely command that autorize such parameter.

 

[wfhy]

Thank you very much!

I have try it as follows , but no succesful. The first line is ok and the second line shows "DATA UNREASONABLE VALUE".Please help me!

CLFOC:FORM=4,DATA=1-3M&....20-1M,APPEND=YES;
CLFOC:FORM=4,DATA=21-3M&....28-9T;

CLFOC:FORM=4,DATA=1-3M&....20-1M;
CLFOC:FORM=4,DATA=21-3M&....28-9T,APPEND=YES;

CLFOC:FORM=4,DATA=1-3M&....20-1M,APPEND=YES;
DATA=21-3M&....28-9T;

My MD110 is bc12 sp7 in CHINA.

 

[fouesnant]

Hi wfhy

Here are the data I am using
CLFOC:FORM=4,DATA=1-3M&2-2J3&3-2J2&4-2J1&5-1M&6-6P1&7-1M&8-5K&9-1M&10-4N;
CLFOC:FORM=4,DATA=11-1M&12-3Z&13-1M&14-5A&15-5C&16-1M&17-20G&18-1M&19-20E&20-1M,APPEND=YES;
CLFOC:FORM=4,DATA=21-15D&22-1M&23-6F&24-1M&25-3X&26-1M&27-10E1&28-1M&29-2L&30-1M,APPEND=YES;
CLFOC:FORM=4,DATA=31-9T2&32-9T1,APPEND=YES;

If it is not successfull make a full printout of the command entered and the result

 

[wfhy]

Fouesnant,
Thank you very much! I have done.
By the way, heve you done expand LIM without power off MD110?
BR
WFHY

 

[fouesnant]

Hi wfhy

Of course, and many time.
There is a section covering this ascpet in alex; you must go to Basic exchange/Operation and Maintenance SES/Configuration CN/Operational Direction Configuration of hardware expansion.

Here you will find the full procedure to add a LIM.

BR