When i try and open a report with CR XI on a computer it does not let me it gives me a "Parameter is incorrect" error and does not open the report. But if i try and open it on a different computer it works perfectly fine. Can someone please help me with this. When i tried to search this error i didnt get anywhere. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Parameter is incorrect
- Thread starter bkrampe
- Start date
- Thread starter
- #3
Not sure if you have subreports in your report, but this is the way i solved mine.
I looked at how the subreport was linked then saved the subreport separate("Save subreport as" To desktop or anywhere) then deleted the subreport off the main report. Then i went back and readded the subreport and put the links back in the way they were before and that solved my problems. I hope this helps.
I looked at how the subreport was linked then saved the subreport separate("Save subreport as" To desktop or anywhere) then deleted the subreport off the main report. Then i went back and readded the subreport and put the links back in the way they were before and that solved my problems. I hope this helps.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question