Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Panasonic TDE600 and Spectralink 8440

Status
Not open for further replies.

aphoneguy56

Technical User
Mar 20, 2015
19
US
Any advice or help appreciated on this. Our customer is changing their Avaya IP phone system over to a TDE600 . They currently have about a dozen Spectralink 8440 handsets with
wi-fi around the building that is working perfectly. They have a large investment in the Spectralink phones and related hardware so I am trying to help them reuse the equip. I have purchased a SIP extension license and installed the SIP EXT32 in the virtual slot. Will the Spectralink phones work as a SIP extension on the TDE600 and is there something I need before I proceed.

Thanks in advance

Harry
 
Yes the will work. Each extension on the spectra has a sip extension on the Panasonic

How are you putting in a tde, they are end of life, you should be using a NS 1000 with tde620 expansion box if you needed analogue phones
 
Thank you! So if there are 12 handsets I will need 12 SIP extension licenses, sound right?
I am currently only certified on the ns700. But even speaking with panasonic tech support they never gave me that option of using a tde620 cabinet for analog phones. Didnt realize this was possible. Anyway thank you again
 
The Ns700 might cover it. What is the number of extensions needed

Yes 12 dect will need 12 sip extension license
 
Too late . We are cutting over the Avaya to Panasonic on the 31st. TDE600 & 620 .About 150 analog phones and 40 500 series phones. My knowledge on the Spectralink and setting up SIP extensions is sketchy at best. Panasonic will help but understandably not offer support on the Spectralink side. Would you be available for some billable phone support if needed regarding SIP ?

Thanks
 
I will help as much as I can. If you have the old sip extension and password and setup on the tde it will make it easier, especially if you can use the same ip for the Panasonic as the old system
 
Thanks - Do you mean the SIP extension and password that the Spectralink is using with the outgoing Avaya G700 ? Maybe I can get that from the current Avaya tech.

This is a residential care facility that on January 1 transfers to new ownership. Phone system , routers and network switches are being changed including a new voice & data provider.

We are handling the voice side of this transition . There will also be a new IT guy.
 
Yes and the port and ip the system is using for sip extension server. If you can match these you wouldn’t have to touch the dect system
 
Hi OB Happy New Year-So we have most of the TDE600 up and running. Now my attention is on the Spectralink phones. The outgoing IT guy said on the old Avaya the Spectra phones were using a virtual port and the IPs
were DHCP for each handset. He didnt offer much more than that. Right now I seem to be spinning my wheels.

Can you offer any phone support on this and you can bill me per hour. Customer is anxious to get these handsets operational. 8474170905 Thanks Harry
 
I am in Ireland, I was looking at the phone setup and it looks like it is on the wifi and not a dect version with a separate controller

If so it is straight forward. The phones get dhcp for themselves but they are programmed to go to one address on the phone system

If you don’t have the password for the sip extensions you will have to log on to each phone to program details

If you want to setup team viewer or send me the backup I can see what you have setup
 
Hi OB-no luck. I think the issue is with the spectralink side. The Panasonic sip extension side seems set up correctly.

The Spectralink isnt seeing network.
 
Do you have a controller for the Spectra link or are each phone on the wifi only
 
I am not aware of any controller . It appears each of the 12 8440 handsets are connected directly thru wi-fi. The handsets were set up as DHCP with the previous setup and can be

set up the same. The IT guy I am working with setup SSID and WPA2-PSK passphrase. We made sure Radio enabled 2.5 & 5 Ghz enabled. Regulatory set to 01 . Saved config and phone reboots.

But it still doesnt even hit his equipment. Under STATUS of handset no IP shows up. I am working with two handsets for now . One handset error message pops up saying that

it does not see any AP's . However access points are all over the place. The other handset error message that says insufficient bandwidth . They are both programmed identically.

I found some material regarding the AP's error message so I will look into it when I get there. Customer may have to just breakdown and get tech support from Spectralink but they

require 4 hour minimum 250.00 an hour . Customer said he would do it but he wants a guarantee it will work so I'm a bit hesitant. Thats where we are at . I will be at site in a couple

hours. Thanks

 
If you connect a laptop to that ssid does it connect and get an ip?
 
Not sure how that works. I did see the SSID of the spectra handset on my laptop via wi-fi. I tried to connect to it but it would not connect.

How do I actually do the registration process of the 3rd party sip extension? Is it automatic ? I dont think I can do much more on the Panasonic TDE
 
In the phone You set the extension as user and id and password if the sip extension

You put in the system as sip server and port Number

If you can’t connect to the wifi ssid of the wifi on a laptop then the phones won’t either
 
Hi OB - Any thoughts on this ? Using a a micro usb I connect the handset to my laptop . I set up ssid and connect. Using Spectralink tool I programmed the wifi first. Checked handset

and was connected to the wifi getting a strong signal on handset . Then I provisioned the handset . So far so good . Everything saved and entered correctly .

Then I went to the last part which is the SIP identification part. Panasonic SIP extension is 1062 and PW 3800 . I entered the following

username - 1062
address - 1062 (not ip address)
authentication 3800
Label - 1062
cant recall - 1062

As soon as I hit SAVE the phone reboots and seems to crash.I lose internet, signal strength is lost has a red x . Handset symbol is red - I spoke to both Panasonic and Spectralink and

they both say my information entered is correct. Very frustrating .
 
Not sure if it would cause the phone to loose internet but I think address should be 1062@pbxipaddress in the settings

It could be the reboot on the phone is loosing something, if you go back and change only the wifi connection does it work

When you go back into the phone is the settings still there

Definitely not an issue on the Panasonic side at this point, but I know the later Panasonic system doesn’t like short passwords on sip extension
 
Thanks .I think you mean the settings of the handset ?..I'll try 1062@pbxipaddress .I dont believe anything gets lost. WIFI settings look good . I'll also try a longer password Thanks
 
Yes sorry. In the handset

What port have you setup in the system for sip server. 5060 or changed to something else
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top