Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Panasonic Tda 30 rel 3

Status
Not open for further replies.

JEFFFLEM

Technical User
Mar 8, 2007
5
CA
When receiving clid on phones the 7 digit tel # has a 1 in front of it.Any ideas?Customer is tring to use their log to call out and with 1 in front it won't work.Panasonic TDA 30 REL 3
 
although i dont know what country you are in this reply is what is relavent in dublin ireland

the no:1 in front of a telephone:# is caused when the service provider(Eircom) sets up the ISDN (BRI lines as point to multipoint ) the 1 is to seperate the 2 lines on the isdn NT1+ plug and play box
in IRE the lines Must be set as Point to Point with 4 digit presentation to work properly.


peter(
 
Does the Caller ID Modification Table in 6.2 mod the number before or after it is logged in to the I/C call log
 
Thanks for response . It's fixed now.For some reason off default there is one digit added Which happens to be on.Took it out and it's fine!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top