Panasonic KXTEA308 Firmware 1

[mccullnc1]

Hi! How do you check which firmware is installed so you can use the right Maintenace Console software? Can it be displayed on a PT, if so how?....Neville

 

[obtsystems]

do you have both v2 and v3 programming tool, if so install v2 first then v3, this will give you both versions on the one tool. I have never came accross v1 yet.

 

[mccullnc1]

Hi! Yes, have two versions of v2 and one on v3. No luck with either. Did find an answer, can do this thro' PT, prog 998, and then flip-flop [select] button. Meet your first V1, v1.0.6. Now to find a compatible Maintenance Console version.

 

[cwc3]

why cant you program the -1 unit thru the keypad !

 

[mccullnc1]

Hi! Yes you can program thro' the PT phone, but it is a real pain compared to the PC I/F. Especially changing text strings. So would like to source the v1 Maintenace Console. Regards Neville

 

[cwc3]

good luck with that the 308 has been brown bread for a while in the states!

 

[obtsystems]

Are you in the euro zone. I can get the v1 tool for the kxtea 308

 

[mccullnc1]

Hi! Yes, in UK. Regards Neville

 

[obtsystems]

Send me your e mail. I am in Kilkenny, Ireland. Google my user name and you will find me. Can't post e mails here. I will send it to you. It is about 35 megs.

 

[mccullnc1]

Many thanks, all resolved!