akhterhussain786
Programmer
- Nov 30, 2024
- 2
i have panasonic kx-ns500 , facing issue of status blinking,so what to do?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
panasonic kx-ns500 status blinking
- Thread starter akhterhussain786
- Start date
- Thread starter
- #3
If this is a new installation/power up, it is normal for the status indicator to blink during initialization and will take approximately 2.5 minutes to cease blinking when switched to normal.
If the flashing occurred while in use, the installation manual details what the different flash rates/colors indicate. See section 4.3.1.
You can download the latest release of KX-NS500 manuals here: https://docs.connect.panasonic.com/pcc/support/pbx/manual/kx-ns/ne_uk/ns500v7-0/index.html
The password to open them is : 2ufrompanasonic
I would recommend you utilize a pdf password unlocker tool to permanently unlock the manuals that you download as well as downloading all the relevant manuals. Who know when Panasonic will shut down that web page.
If the flashing occurred while in use, the installation manual details what the different flash rates/colors indicate. See section 4.3.1.
You can download the latest release of KX-NS500 manuals here: https://docs.connect.panasonic.com/pcc/support/pbx/manual/kx-ns/ne_uk/ns500v7-0/index.html
The password to open them is : 2ufrompanasonic
I would recommend you utilize a pdf password unlocker tool to permanently unlock the manuals that you download as well as downloading all the relevant manuals. Who know when Panasonic will shut down that web page.