Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

panasonic d816 caller id 1

Status
Not open for further replies.

abdooleotoole

Technical User
Jun 9, 2011
5
US
I have a panasonic d816 with kx-t7425 stations. I would like caller id to display for the incoming call when i am already on the phone. Can I just upgrade the stations, or does this require a new KSU?
 
if you have caller id already, when you are not on the phone, then turn on call waiting 7311 or 7321 on you phone, it will flash up on your screen when the call bleeps at you
 
Re-Cap you have to subscribe to caller id name and number on all the lines on the system to see info whilst on the line and KX-TD system does not work with call waiting caller id service on the line ....!
 
It does if he is on the phone and a call comes in on a second line which is a ringing line on his phone. Call waiting off second line flashes only. Call waiting on second line beeps and caller Id Will flash up on screen. Unless the US system is different
 
What I said was that a lot of carriers here provide free Call waiting on the line it self with call waiting caller ID indication that you hookflash to get the new incoming call on the TD series here does not support that indication service " that what I was clarifying
I am not talking about 8 Trunks in hunt group that have caller id on them you are correct out of the box you need to tell each ext that you want a C.O cw tone indication . S
 
I won't have anything to do with same line call waiting, it is a waste of time on a system. if a customer has it I will tell them to remove it if a system is going in
 
I agree when I dumped Verizon and got Time Warner Triple Play
I got every thing but voicemail on the line for free and basicaly
Jacked in to the router and first call I was on I here the call waiting fizzle and look at the display and I see a call from someone I don't want talk too interrupting me instead of getting the normal busy tone they should havegotten,So first thing I did was log on to TW web interface and call fwd busy/no answer my calls to my google voice number and kicked the no answer timer to 6 rings !! HATE C.O Call Waiting!!
 
So if I only have one CO connected to my D816 then I can't get caller ID to flash on the call waiting with the KX-TD system? Can I just upgrade my stations?
 
It is not the same line caller I'd that is the problem. It is call waiting I have problems with on a system. If I am talking to a customer and a second call comes in even if I answer it, I can't give it to someone else to deal with or no one else can answer the call or know it is ringing
 
I believe the only call waiting caller ID you can get with the TD series is if you have multiple lines on the system ringing in. So if your on line 1 and a call comes in on line 2 you would get the caller ID info to flash for that line. But I don't think the older TD systems would do it if you only have one incoming line.
 
THERE IS NO "UPGRADING OF THE STATIONS"Listen !!
You will need a Newer System Like TDA 50G or NCP 500 to have same functionality of your 816 KX-TD like I.E. re use 24 button 7200/7400 series phones DPT and Were you have a single line in your house or small office Call Waiting Caller ID but like OBT and I think that it is bush league to run a business off a single line with CW CID

I Personally run My SOHO BiZ off TDA 50G with 1 pots line 2 Magic Jacks and a GSM GateWay so I have a total of 4 C.O. Apearances no fizzle bleeps in my ear piece no way !!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top