Panasonic D816 & VOIP

[ceil32]

I have a Panasonic D816 PABX and am looking at setting up a VOIP solution.

Ideally I would like to setup access to two other sites with say a 4 trunk card.

Can anyone tell me whether this system has the capability to add in a VOIP interface card and if so, what the card model is?

Thanks in advance..

 

[Trotski]

No Voip for this system you will need to update

 

[ceil32]

Ok cheers.

I have one office with fifteen people and am relocating five of those to a nearby smaller office

Both of these locations need to have VOIP connectivity to the UK

What system could you recommend?

 

[cwc3]

KX-TDE 100/200 or an NCP 500 when it arrives

 

[ceil32]

I awaiting a quote for a KX-TDE - do you know whether this would be compatible with an NEC Aspire and/or NEC NEC XN120?

Cheers..

 

[cwc3]

right off hand i'dd say no !

 

[Trotski]

TDE will be your best bet, use SIP trunks to connect to NEC(if they have the capability?)

 

[ceil32]

OK cheers.

Does anyone know whether Panasonic KX-T7433 handsets are VOIP compatible - either with a Panasonic VOIP system or an NEC one?

 

[cwc3]

handsets is the part of the phone you talk and listen
through . The KX-T 7433's are not voip phones
but can be reused at the KX-TDE site the nt-series
phones can be used off premise.....

 

[ceil32]

Sorry if I was unclear.

I understand they aren't VOIP phones, but wasn't sure if I had to upgrade them to VOIP handsets - so the KX-T7433 handsets can be used with a KX-TDE system?

Whats an NT Series phone?

 

[cwc3]

get on Panasonics website in your prospective country
and read info regarding the types of phones that are available on the KX-TDE .....

 

[ceil32]

I've decided to go with the NEC Aspire and/or NEC NEC XN120

This is the same system they have in the other group sites.

Once the system is installed - if I receive an external call from a customer, could I transfer that call to the other site (assuming we have a trunk/tunnel between sites)?

Also, what kind of bandwidth does a standard voice call use?

Thanks..

 

[cwc3]

no more questions here if you are doing NEC.....

 

[ceil32]

Sorry forgot I was on a Panasonic thread