Paging with IP sets 2

[mars1947]

I have an Option 11 and I cannot access the paging ACOD from any of my IP sets. I get "release and try again" after dialing my paging ACOD. Am I missing a class of service option with the IP sets?

 

[tgoldsmith]

I believe you need to change the TGAR not to match the TARG on the Paging route.

 

[theNAR]

You have to make sure that the phone you are dial the ACOD from has the TGAR set to 1 I believe. I changed this on one of my phones and this worked no problems.

 

[tgoldsmith]

TARG/TGAR are not levels . If you want to block a phone from a route ACOD then you match the TGAR and the TARG. IF you want to allow it then you make it different. Someone correct me if I am wrong.

 

[mars1947]

TGAR was the answer, I had the wrong TGAR on these sets. Thank you all for the help, I gave each of you a star!