Paging to a Biamp Tesira

[tnjwinters]

Trying to set up overhead paging from a CS1000e 7.5 through an analog line into a Biamp Tesira with a STC-2 analog port. So far it works fine but the Biamp doesn't sense when you hang up. Are there any setting's on the PBX or analog post that might help with this issue.

 

[KCFLHRC]

You might try setting LDTA in CLS .

 

[KCFLHRC]

Feature description
500/2500 Line Disconnect
500/2500 Line Disconnect is invoked when the system detects
on-hook/disconnect supervision from a party connected to an analog
(500/2500-type) port. Dial tone is sent to this port for a specified period
of time (the default is six seconds) which is defined in LD 15 at the Line
Disconnect Tone Timer (LDTT) prompt.
It is used when the analog (500/2500-type) port is connected to an
automated attendant or voice mail. It allows the system to know that it is
not connected to a telephone, and to disconnect if the other telephone
has hung up (for example, during an automated message or a voice mail
message).

 

[tnjwinters]

LDTA is what I ended up using and it works great. Thank you for the help.

 

[KCFLHRC]

Good news, glad it worked