Paging, Key on Attendant, Trunk Group Access Code

[MtlSwim]

Paging key on Console 2250 (meridian option11) does not work. Dialing '75" the ACOD does work
Key 3 is labelled PAG on the console set and is configured as ADL 6
I have tried to configure this key as 03 PAG 75 but receive "SCH0358
Input is not PAG trunk group access code.". Putting 7500 did not help.
This key was working in the past.

a few months ago i was receiving these two error2 (see below)and the service technician disabled the RAN card and I m wondering if it could be related somehow
TRK191 5 0 0 0
ERR220 25 0
This is the information I have for route 25:
TYPE TLST
TKTP RAN ACOD 7925
ROUT 25
DES MIRAN_CHAN.0
TN 005 0 00 00 MBER 1 MIRAN_CHAN.0

Here is the print out of 5-0
REQ: prt
TYPE: tnb
TN 5 0
DATE
PAGE
DES

DES MIRAN_CHAN.0
TN 005 0 00 00
TYPE RAN
CUST 0
XTRK EXUT
TIMP 600
BIMP 600
AUTO_BIMP NO
RTMB 25 1
CONN 8
DATE 24 MAY 2000

BTW Paging is route 22 ACOD 75 on TN 8 6

REQ: prt
TYPE: tnb
TN 8 6
DATE
PAGE
DES

DES PAGING
TN 008 0 00 06
TYPE WAT
CDEN 8D
CUST 0
XTRK EXUT
FWTM NO
TIMP 600
BIMP 3COM
AUTO_BIMP NO
TRK ANLG
NCOS 0
RTMB 22 1
NITE
SIGL LOP
SUPN NO
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD
P10 NTC
TKID
DATE 29 MAY 2000

 

[thattekguy]

Press the button on the console and put in the ACOD you want it to dial then press again to store it and test,it is just like any other ADL key on a phone.

 

[johnpoole]

ld 21
prt
0
route 22

then look for acod


john poole
bellsouth business
columbia,sc

 

[johnpoole]

if the acod is 7500, post the rdb

john poole
bellsouth business
columbia,sc

 

[MtlSwim]

ACOD is 75


REQ PRT
TYPE: rdb
CUST 0
ROUT 22

TYPE RDB
CUST 00
DMOD
ROUT 22
DES PAGING
TKTP WAT
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 75
CPP NO
TARG 01
CLEN 1
BILN NO
OABS
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 1
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3

IENB 5
TFD 0
LEXT 100
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR NO
MUS NO
RACD NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0


PAGE 002

FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

REQ:

 

[johnpoole]

can you dial 75 from your phone and hit one of those trunks? i just noticed something i should have seen after your 1st post... for a pag key to word the trunk type has to be pag.. mine are wat also so i can use tfd.. timed force disconect.. after 2 minutes the trunk drops.. keeps the valcomm from hanging up..

when i changed the trunk type (out trunks, out route, reinstall) to wat... my pag key died. i told the operators to dial the acod.. but they have a 3904 beside the consloes for code blue, that has a hot d 4 xxxx to the all page

john poole
bellsouth business
columbia,sc

 

[MtlSwim]

I followed the 2nd post from "thattekguy" and it worked. I forgot how the ADL function works but that explains how it got changed so easily.

can I program hot keys on the attendant 2250?
Much less chance of a receptionist changing it by accident.

(thanks thattekguy and John)

 

[MtlSwim]

I just tried to program a hot key and recieved:
SCH0362
Unable to match input field with stored mnemonics.

 

[StanleySteamer]

Instead of ADL or HOT use
KEY xx AUTO yyyyyyyyy...
This is an autodial that the attendant cannot change.

 

[MtlSwim]

SUPER!!! Works ! Thanks StanleySteamer

 

[acewarlock]

The reason you couldn't program the key a PAG, is because the PAGE route is programmed as a WAT route so you can use the disconnect timers.

 

[MtlSwim]

Yeah, Johnpoole mentioned that above too
Boy, u guys are sure experts!!
Thanks again