Paging Code Calls (Chimes) Avaya CM 7.1 with G450s

[phoneman662000]

I am presently switch the customer over from a Avaya CM 5.2 system with MCC cabinets to Avaya CM 7.1 with G450's. Presently they are using an AUX trunk card on the 5.2 system to do paging code-calls (Chimes over the Speakers).
My question is now that the G450's do not have Aux trunks how can i accomplish this? The new system allowed me to put it in the paging code calling fields using a MM711 card and even shows it as an AUX trunk, but it does not work hooked to there existing paging system.
Any ideas on how to make this work.
Thanks in advance.

 

[DTDude]

I was under the impression that this is simply no longer possible without an MCC, CMC, or G650 and an aux trunk card.

I converted a site from a standalone 5.2 system in a CMC cabinet to an LSP site on 7.1 in a G450 earlier this year. We ended up having to purchase a new Bogen paging interface for the PA system and now page via a station port.

 

[phoneman662000]

DTDude I believe you are right was told by ATAC that it would work but have not been able to accomplish it. Working with support now to verify yes or no if it will work. Will update when i get confirmation.