jgb5pmr6fcg567ot52iq
Vendor
I'm working on a call center and was wondering if there is any way to page an analog extension. I can't find anywhere in the docs that says it's possible and I wasn't able to do it in house. Anyone else tried it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Paging Analog extensions
- Thread starter jgb5pmr6fcg567ot52iq
- Start date
- Status
kristiandg
Programmer
Its not possible because analog extensions don't have digitally-controlled speakers in them. This is not a limitation of the IP Office, rather a limitation of the analog station technology.
Kris G.
Kris G.
It could be possible if someone wanted to do it I would suppose, but not with current analog equipment.
You can only page on analog ports if the port is open all the time.
Just put in 5402 phones they are pretty inexpensive. They can't do intercom, but can page I believe.
Or 4406 phones.
You can only page on analog ports if the port is open all the time.
Just put in 5402 phones they are pretty inexpensive. They can't do intercom, but can page I believe.
Or 4406 phones.
- Status
Similar threads