Paging Access with Meridian system

[biteablecookie]

Is it possible to temporarily change a TGAR assigned to a telset by use of an authorization code?

Thus allowing paging system access to paging systems controlled by TGAR.

Any help with this would be greatly appreciated.

Thanks

 

[KCFLHRC]

Yes you can

The Authorization Code Security Enhancement feature enables a user to
temporarily override the access restrictions assigned to a station or trunk
because of their assigned Network Class of Service (NCOS), Class of
Service (COS), and Trunk Group Access Restrictions (TGAR) codes. If a
user requires access to system facilities in addition to that allowed on the
telephone, the Authcode feature can be used to provide them.

 

[KCFLHRC]

You can also change the users NCOS and TGAR based on time of day with Scheduled Access Restriction if that would be a better solution.

 

[biteablecookie]

Thanks for the replies, I truely appreciate the assistance.

Cheers

 

[johnpoole]

do not miss the fact that you have to dial an ac 1,2 or steering code to get auth code tone.. if the ncos is below mfrl then you are prompted for an auth code... so if you build a steering code and point it to the page route... tgar is out of the picture... BUT if you make mfrl high, everyone has to have a code post dsc... each person or dept can have a unique code.. BUT you can change the acod to a 7+ digit number and keep it non published.. i have seen it 12 digit and only accessed via sys speed dial... as many ways to do that as you have phones..

point being you can cot use auth code and acod

just a few "burns" i have ran into..

john poole
bellsouth business
columbia,sc