Page Problems

[Darryl442]

system is a Modular ICS ver4.0
I just hooked up a bogen page zone module and now i am having some complaints from employees. For the zone module to activate the zone you have to enter feature 630 then press (*1 for zone 1) ,(*2 for zone 2)and (*3 for zone 3).This extra button pressing is to much for some people.
Is there a way to program a phone button with F630 + *1.
Or is there any other way around this.

 

[curlycord]

Press Feature * 3, press a button u want to use, press Feature 630.
To use Press Page button and * 1

http://www.spoctel.com

 

[Slingblade2000]

Are you able to install the Bogen via a trunk port. This would allow to program the line key to the phone in "Line Access" and then the customer would just need to enter the zone he or she is paging...

 

[Darryl442]

curlycord that is how it is setup now.

Slingblade2000 please tell me more.

 

[Darryl442]

What I realy need to know is can i add *1 to the page button.

 

[executone]

Put paging system onto a CO line you can program a speeddial key to dial it for you. Example: Put Co line in group 8 and setup sppeddial to acces group 8 and dial *1.

Good Luck!!