PABX siemens 4000v5

[dreb20]

Hi anyone can you help me.. how to resize or change size or can you tell me how to get this logs
im using command sta-hista.
or is there a way to get same as sta-hista logs not on via command? thank you. im not familiar on web base on hp4k thanks

PBX Logs size was larger than usual as a result failed to extract the complete PBX Logs

sample logs
STA-HISTA:SEARCHB,2024-04-17/00:00,;
H500: AMO HISTA STARTED
H1: 01430 ERROR MESSAGES FOUND

F5749 E8 N4194 NO ACT BPA BOARD LW REQUEST 24-04-18 18:02:51
ALARM CLASS:CENTRAL:002
P902:LTG1 :LTU18:008: 00 : 0 Q2324-X500 STMI4/1 BST:01 PLS:-11
FORMAT:43
REASON:00H ONLY SIGNALING
MSG_IP_LINK_FAILURE
4576656E74436F64653A204D53475F49 505F4C494E4B5F4641494C5552452020
202053657665726974793A204D616A6F 72FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

F5749 E8 N4193 NO ACT BPA BOARD LW REQUEST 24-04-18 17:34:08
ALARM CLASS:CENTRAL:002
P205:LTG1 :LTU3 :004: 00 : 0 Q2324-X500 STMI4/1 BST:01 PLS:-10
FORMAT:43
REASON:00H ONLY SIGNALING
SENTA_NOK_UPGRADE_REQ

 

[sbcsu]

What do you want the logs for ?

The one error message that I can see is that you have to update the loadware on your STMI cards.

 

[dreb20]

Hi,

they said only PBX Logs size was larger than usual as a result failed to extract the complete PBX Logs

fyr please see details below HISTA
or if possible to change the size of entries it almost to the max.thank you
REG-HISTA;
H500: AMO HISTA STARTED
ADD-HISTA: 2500,DEACT ;
ACTIVATE-HISTAEACT ;
CHANGE-HISTA:STALARM,DEACT ;

AMO-HISTA-111 READ HTS HISTORY FILE
REGENERATE COMPLETED;
<sta-hista
RTYPE = ;
STA-HISTA:;
H500: AMO HISTA STARTED
+---------+-----+-----------+--------+-------------------------+
I ALARM I ABS I ALARM I ALARM I ALARM NAME I
I GROUP I I NUMBER I PRIO I I
+---------+-----+-----------+--------+-------------------------+
I CENTRAL I BPA I 002 I MAJOR I LTU_FAILURE I
+---------+-----+-----------+--------+-------------------------+
I CENTRAL I BPA I 033 I MAJOR I BAD IP CONNECTIVITY I
+---------+-----+-----------+--------+-------------------------+
I CENTRAL I BPA I 038 I MAJOR I CC-AP UNAVAILABLE I
+---------+-----+-----------+--------+-------------------------+
I SWU-PER I BPA I 004 I MINOR I DIGITAL_VOICE_DEVICES I
+---------+-----+-----------+--------+-------------------------+

AMO-HISTA-111 READ HTS HISTORY FILE
START COMPLETED;
<dis-hista;
DIS-HISTA;
H500: AMO HISTA STARTED
DIRECTORY SIZE: 2500 KB
NO. OF ENTRIES 3822
OLDEST ENTRY 2024-04-06 13:57
LATEST ENTRY 2024-04-19 09:43
FILE STATUS
ALARMING BY HISTO-FILE OVERFLOWF : DEACT
HW-ERROR-STATISTIC: FROM 1000 ENTRIES 933 THRESHOLD REACHED
HWES-TABLE: FROM 1000 ENTRIES 1000 OCCUPIED
SW-ERROR-STATISTIK: 87 ENTRIES AVAILABLE
STATISTIC-ALARMING: DEACT
STATISTIC-STATE: ACT

 

[sbcsu]

The HISTA can be made larger but you will lose all current entries.
DEL-HISTA;
ADD-HISTA:10000,DEACT;

 

[dreb20]

Hi Sbcsu,

Thanks..By the way what is the problem below details
HW-ERROR-STATISTIC: FROM 1000 ENTRIES 933 THRESHOLD REACHED
HWES-TABLE: FROM 1000 ENTRIES 1000 OCCUPIED
SW-ERROR-STATISTIK: 87 ENTRIES AVAILABLE

Thank You

 

[sbcsu]

Hardware Errors that are repeating over and over.
Bring your system up to the latest hot fixes/loadware/csta/platform etc. fixes then these issues will be minimized

 

[dreb20]

Hi SBCSU,

Thank you.. this is hipath 4000V5, which is end of life system. i dont know if software,loadware or latest patch is dowloadable on portal.

thank you..

 

[sbcsu]

Hi Dreb - yes you can still download all the hotfixes and patches for V5 on the portal