Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

P630 HMC question

Status
Not open for further replies.
bcre3306

bcre3306

MIS
May 7, 2002
45
US
I know this is a basic question but I can't find the answer. I want to know what your suppose to use for a console in a HMC system.
Thanks
 
Sort by date Sort by votes
Right-click on the system name/serial number and choose open terminal.

If you still want a hardware console, there should be serial port on the system itself.
 
Upvote 0 Downvote
The Netfinity PC, Linux OS and the WebSM code that IBM provides for the HMC has been customized, integrated and tested to provide the HMC functions.

This is the only supported configuration.
 
Upvote 0 Downvote
There is also a passthrough telnet port on the HMC that allows you to telnet to that port with a script to do a remote console. See the appendix to the HMC users/admin guide
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Dan Gaeta
  • Locked
  • Question
Power 740 and HMC
Replies
1
Views
232
pa2nc
pa2nc
TSch
  • Locked
  • Question
HMC - Reset or Refresh dlpar List
Replies
1
Views
144
ChrisHirst
ChrisHirst
trifo
  • Locked
  • Question
List ALL IO adapters in HMC command line
Replies
0
Views
119
trifo
trifo
sudo1
  • Locked
  • Question
How to Disable SSLv2 in HMC
Replies
0
Views
37
sudo1
sudo1
neuralnode
  • Locked
  • Question
Create VIOS vhost from HMC CLI
Replies
0
Views
91
neuralnode
neuralnode

Part and Inventory Search

Sponsor

Back
Top