First off thanks in advance for even considering helping out... now on to my problem. I recently purchased an ASUS P4S533-MX mobo to build a budget PC for a friend. the case comes with headphone and microphone ports on the side of the case.. the cabling however, to me is confusing I will write out the Asus mob pins and then the cables from the case. I need help in matching up each pin from the case to its spot on the Mobo
Mobo 1st
pin #1 AGND
pin #2 +5VA
pin #3 BLINE_OUT_R
pin #4 (NO PIN)
pin #5 BLINE_OUT_L
pin #6 MIC2
pin #7 MICPWR
pin #8 Line out_R
pin #9 NC
pin #10 Lin out_L
Cable from case #1
cable #1 R-OUT (purple wire)
cable #2 R-IN (yellow wire)
cable #3 GND (black wire)
cable #4 MIC-IN (green wire)
Cable from case #2
cable #1 MIC-IN (orange wire)
cable #2 GND (black wire
cable #3 L-IN (red wire)
cable #4 L-OUT (blue wire)
that is all of the pin assignments.. I would certainly appreciate help in matching cable to pins.
Thank you ..
Mobo 1st
pin #1 AGND
pin #2 +5VA
pin #3 BLINE_OUT_R
pin #4 (NO PIN)
pin #5 BLINE_OUT_L
pin #6 MIC2
pin #7 MICPWR
pin #8 Line out_R
pin #9 NC
pin #10 Lin out_L
Cable from case #1
cable #1 R-OUT (purple wire)
cable #2 R-IN (yellow wire)
cable #3 GND (black wire)
cable #4 MIC-IN (green wire)
Cable from case #2
cable #1 MIC-IN (orange wire)
cable #2 GND (black wire
cable #3 L-IN (red wire)
cable #4 L-OUT (blue wire)
that is all of the pin assignments.. I would certainly appreciate help in matching cable to pins.
Thank you ..