Nov 20, 2011 #1 gjwolf Technical User Nov 20, 2011 6 US when I do a sho module and see m711's or other modules how do you see the specific info on ports etc.. for example if troubleshooting thanks
when I do a sho module and see m711's or other modules how do you see the specific info on ports etc.. for example if troubleshooting thanks
Nov 21, 2011 #2 jimbojimbo Vendor Jul 2, 2002 1,081 US Just like in CM you do a list config media-gateway and will get the same type of port information. Upvote 0 Downvote
Nov 24, 2011 Thread starter #3 gjwolf Technical User Nov 20, 2011 6 US I didn't see list commands from telneting into the ip gateway... I see sho and set commands Upvote 0 Downvote
Nov 28, 2011 #5 AvayaTier3 Technical User Dec 31, 2008 4,600 US http://support.avaya.com/css/P8/documents/100057527 The commands for showing media module ports are in CM, not the CLI for the Media gateway. See document link attached for CLI user information A great teacher, does not provide answers, but methods to teach others "How and where to find the answers" bsh 37 years Bell, AT&T, Lucent, Avaya Tier 3 for 27 years and counting http://bshtele.com Upvote 0 Downvote
http://support.avaya.com/css/P8/documents/100057527 The commands for showing media module ports are in CM, not the CLI for the Media gateway. See document link attached for CLI user information A great teacher, does not provide answers, but methods to teach others "How and where to find the answers" bsh 37 years Bell, AT&T, Lucent, Avaya Tier 3 for 27 years and counting http://bshtele.com