Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OVL316

Status
Not open for further replies.
plough

plough

Technical User
Jul 12, 2005
279
US
I had to upgrade firmware on 3904
Someone unplugged phone during upgrade.

I tried to SUS 32 FDLU

but it does not seem to Suspend. I still get the OVL316 error. When I SUS 32 FDLU it tells me that "
PSDL ABORT IS WORKING PLEASE WAIT !"

But it has been like that for about 15 min now.

Do I need to INI?
 
Sort by date Sort by votes
If anyone gives a hoot - I did INI and reran the FDLU on the TN and everything was fine.

 
Upvote 0 Downvote
Unable to access any overlays on call server?, OVL306 given on TTY. This was the result of a failed FDLU to an M3903 telset in my case, I suspect pertinent to all M3900 range of phones however.
After accessing load 32 by using the suspension command and an FWVU is run against the affected TN you get 'PSDL IS NOT IDLE' message

Fix:
Use the suspend command to access ld 32, use fdlc to cancel the suspended command, disable & enable the affected card and re-commence a subseqent FDLU.
This time, in my case, the download was successful.


All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top