Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Overland LoaderExpress with Backup Exec 7.3

Status
Not open for further replies.

kg00se

IS-IT--Management
Mar 2, 2006
56
US
I am running Backup Exec 7.3 on and old Windows NT 4.0 box communicating to a Overland LoaderExpress DLT Tape Carrousel and I am having problems getting Backup Exec to see the device. the Tape Device is configured and working properly in windows nt, how ever in the Divices tab on backup exec it is showing that the Overland is Off-Line then shows <Unknown Drive> - Disabled.

Would really like to get some insite on this and a quick fix. this has been driving me up a wall.

Thanks,
kg00se
 
Delete the drive out of backup exec.

Also check the system log for any event ID 7,9, 11
 
Deleted the drive and restart Backup Exec. the drive came back as the same as before.

I also checked the logs for any event id 7,9, or 11 and found nothing.

kg00se
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top