OUTSIDE LINE ON ANALOG SET 1

[norteldiva]

Hi There:

I have a Partner II rel 2; I have set the phone to grab internal icm tone first, and we need to be able to dial 9 to get an outside line. If we do, it goes to a fast busy. If I set the auto line select to an outside line, it works fine - so it's not restricted to outside lines, but need to use dial 9 from intercom tone. Any suggestions?

 

[Taz666_imported]

When you program Auto Line Selection program the intercom as the first choice and then the lines that the station can use to dial out.
**Intercom, 5,4,3,2,1**

 

[norteldiva]

Taz.. Thank you tons!

 

[1043]

This is everything you need to know about the Partner II

http://support.avaya.com/japple/css...ea&temp.productID=107600&temp.bucketID=108020

http://support.avaya.com/japple/css/japple?PAGE=Product&temp.productID=107600