Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outing TODS 1

Status
Not open for further replies.
bc1111

bc1111

Technical User
Oct 21, 2011
50
0
0
US
I'm trying to out a TODS in ld 87.CUST 0
FEAT esn

MXLC 0
MXSD 512
MXIX 5
MXDM 10
MXRL 50
MXFC 0
MXSC 0
NCDP 0
AC1 9
AC2
DLTN YES
ERWT YES
ERDT 3
TODS 0 06 00 07 59
0 20 00 20 59
1 08 00 19 59
7 00 00 05 59
7 21 00 23 59
RTCL DIS

I get esn002 when I try to X it out.

REQ chg
CUST 0
FEAT esn
MXLC
MXSD
MXIX
MXDM
MXRL
MXFC
CDP
MXSC
NCDP
AC1
AC2
DLTN
ERWT
ERDT
TODS x
ESN002
TODS x
ESN002
TODS 0x
ESN002
TODS
Any Ideas.
 
Sort by date Sort by votes
Soon as I type X it gives me esn002 (need numeric input)
 
Upvote 0 Downvote
This does seem odd as the book states..

TOD Time of Day schedule esn-1
0-1 CDP
0-7 NARS/BARS
Precede with X to turn off schedule.

TODS Time of Day schedule esn-1
1-31 Schedule period to be changed.
0 Catch-all period. Start and stop times are not
relevant for this period. The next prompt is ALST.
0-1 CDP
0-7 NARS/BARS
0-7 hh mm hh mm
Schedule number, start hour, start minute, end hour,
end minute for NARS/BARS.
0-1 hh mm hh mm
Schedule number, start hour, start minute, end hour,
end minute for CDP.

X1-X31 Remove the schedule period
X0 Remove/clear all alternatives associated with period
0. This leaves the catch-all treatment as local
attendant treatment.
<CR> End NAS feature data setup and return to REQ
prompt.

I think that the initial "0" setting such as "0 06 00 07 59" that you have might have to be left in or perhaps changed to the default setting of "TODS 0 00 00 23 59".

I've logged into a Option 11c 4.5 system and I get the same problem and I'm logged in at PWD2.

Existing TODS

ERDT 6
TODS 1 00 00 08 29
2 08 30 16 29
3 16 30 23 59
RTCL YES

Change commands

REQ CHG
CUST 0
FEAT ESN
MXLC
MXSD
MXIX
MXDM
MXRL
MXFC
MXFS
CDP
MXSC
NCDP
AC1
AC2
DLTN
ERWT
ERDT
TODS 0 00 00 23 59
TODS
RTCL
NMAP
ETOD
TGAR

Checking it again now shows

REQ PRT
CUST 0
FEAT ESN

MXLC 1
MXSD 5
MXIX 0
MXDM 200
MXRL 200
MXFC 0
MXFS 0
MXSC 100
NCDP 6
AC1 9
AC2 22
DLTN NO
ERWT YES
ERDT 6
TODS 0 00 00 23 59
RTCL YES
NCOS 0 - 0
NCOS 1 - 1
NCOS 2 - 2
NCOS 3 - 3
NCOS 4 - 4
NCOS 5 - 5
NCOS 6 - 6
NCOS 7 - 7
NCOS 8 - 8
NCOS 9 - 9
NCOS 10 - 10
NCOS 11 - 11
NCOS 12 - 12
NCOS 13 - 13
NCOS 14 - 14
NCOS 15 - 15
NCOS 16 - 16
NCOS 17 - 17
NCOS 18 - 18
NCOS 19 - 19
NCOS 20 - 20
NCOS 21 - 21
NCOS 22 - 22
NCOS 23 - 23
NCOS 24 - 24
NCOS 25 - 25
NCOS 26 - 26
NCOS 27 - 27
NCOS 28 - 28
NCOS 29 - 29
NCOS 30 - 30
NCOS 31 - 31
NCOS 32 - 32
NCOS 33 - 33
NCOS 34 - 34
NCOS 35 - 35
NCOS 36 - 36
NCOS 37 - 37
NCOS 38 - 38
NCOS 39 - 39
NCOS 40 - 40
NCOS 41 - 41
NCOS 42 - 42
NCOS 43 - 43
NCOS 44 - 44
NCOS 45 - 45
NCOS 46 - 46
NCOS 47 - 47
NCOS 48 - 48
NCOS 49 - 49
NCOS 50 - 50
NCOS 51 - 51
NCOS 52 - 52
NCOS 53 - 53
NCOS 54 - 54
NCOS 55 - 55
NCOS 56 - 56
NCOS 57 - 57
NCOS 58 - 58
NCOS 59 - 59
NCOS 60 - 60
NCOS 61 - 61
NCOS 62 - 62
NCOS 63 - 63
NCOS 64 - 64
NCOS 65 - 65
NCOS 66 - 66
NCOS 67 - 67
NCOS 68 - 68
NCOS 69 - 69
NCOS 70 - 70
NCOS 71 - 71
NCOS 72 - 72
NCOS 73 - 73
NCOS 74 - 74
NCOS 75 - 75
NCOS 76 - 76
NCOS 77 - 77
NCOS 78 - 78
NCOS 79 - 79
NCOS 80 - 80
NCOS 81 - 81
NCOS 82 - 82
NCOS 83 - 83
NCOS 84 - 84
NCOS 85 - 85
NCOS 86 - 86
NCOS 87 - 87
NCOS 88 - 88
NCOS 89 - 89
NCOS 90 - 90
NCOS 91 - 91
NCOS 92 - 92
NCOS 93 - 93
NCOS 94 - 94
NCOS 95 - 95
NCOS 96 - 96
NCOS 97 - 97
NCOS 98 - 98
NCOS 99 - 99
ETOD 1 7
TGAR NO

To put my settings back, I do

REQ CHG
CUST 0
FEAT ESN
MXLC
MXSD
MXIX
MXDM
MXRL
MXFC
MXFS
CDP
MXSC
NCDP
AC1
AC2
DLTN
ERWT
ERDT
TODS 1 00 00 08 29
TODS 2 08 30 16 29
TODS 3 16 30 23 59
TODS
RTCL
NMAP
ETOD
TGAR

REQ PRT
CUST 0
FEAT ESN

MXLC 1
MXSD 5
MXIX 0
MXDM 200
MXRL 200
MXFC 0
MXFS 0
MXSC 100
NCDP 6
AC1 9
AC2 22
DLTN NO
ERWT YES
ERDT 6
TODS 1 00 00 08 29
2 08 30 16 29
3 16 30 23 59
RTCL YES
NCOS 0 - 0
NCOS 1 - 1
NCOS 2 - 2
NCOS 3 - 3
NCOS 4 - 4
NCOS 5 - 5
NCOS 6 - 6
NCOS 7 - 7
NCOS 8 - 8
NCOS 9 - 9
NCOS 10 - 10
NCOS 11 - 11
NCOS 12 - 12
NCOS 13 - 13
NCOS 14 - 14
NCOS 15 - 15
NCOS 16 - 16
NCOS 17 - 17
NCOS 18 - 18
NCOS 19 - 19
NCOS 20 - 20
NCOS 21 - 21
NCOS 22 - 22
NCOS 23 - 23
NCOS 24 - 24
NCOS 25 - 25
NCOS 26 - 26
NCOS 27 - 27
NCOS 28 - 28
NCOS 29 - 29
NCOS 30 - 30
NCOS 31 - 31
NCOS 32 - 32
NCOS 33 - 33
NCOS 34 - 34
NCOS 35 - 35
NCOS 36 - 36
NCOS 37 - 37
NCOS 38 - 38
NCOS 39 - 39
NCOS 40 - 40
NCOS 41 - 41
NCOS 42 - 42
NCOS 43 - 43
NCOS 44 - 44
NCOS 45 - 45
NCOS 46 - 46
NCOS 47 - 47
NCOS 48 - 48
NCOS 49 - 49
NCOS 50 - 50
NCOS 51 - 51
NCOS 52 - 52
NCOS 53 - 53
NCOS 54 - 54
NCOS 55 - 55
NCOS 56 - 56
NCOS 57 - 57
NCOS 58 - 58
NCOS 59 - 59
NCOS 60 - 60
NCOS 61 - 61
NCOS 62 - 62
NCOS 63 - 63
NCOS 64 - 64
NCOS 65 - 65
NCOS 66 - 66
NCOS 67 - 67
NCOS 68 - 68
NCOS 69 - 69
NCOS 70 - 70
NCOS 71 - 71
NCOS 72 - 72
NCOS 73 - 73
NCOS 74 - 74
NCOS 75 - 75
NCOS 76 - 76
NCOS 77 - 77
NCOS 78 - 78
NCOS 79 - 79
NCOS 80 - 80
NCOS 81 - 81
NCOS 82 - 82
NCOS 83 - 83
NCOS 84 - 84
NCOS 85 - 85
NCOS 86 - 86
NCOS 87 - 87
NCOS 88 - 88
NCOS 89 - 89
NCOS 90 - 90
NCOS 91 - 91
NCOS 92 - 92
NCOS 93 - 93
NCOS 94 - 94
NCOS 95 - 95
NCOS 96 - 96
NCOS 97 - 97
NCOS 98 - 98
NCOS 99 - 99
ETOD 1 7
TGAR NO
REQ

My settings are back to normal again.






Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Upvote 0 Downvote
I also find it odd. It's a opt 61 Rls 5.5
 
Upvote 0 Downvote
You have to remember the TOD entries have to add up to a 24 hours... if you change 0 to 00 00 23 59 then there's no 1-7, if you make 0 06 00 16 59 then you have to make 1 17 00 23 59 or further break it down till you cover a 24 hr period.
 
Upvote 0 Downvote
Forgot to mention, normally, you don't define TOD 0 (0 and 7 are special TOD) you define the schedule on 1-7 and whatever time is left that doesn't cover the 24 hour period, the system will make that TOD 0.

I'm not sure what you're trying to do, if you looking to disable a particular TOD, that's done at the RLI level. If you looking to redefine your TOD, you'll need to redefine entry 1-7, you can't delete TOD in LD 86, only change.
 
Upvote 0 Downvote
The customer wants to disable the TOD controls.
 
Upvote 0 Downvote
disable TOD in the RLI at the TOD prompt x1 to disable TOD 1, x2 to disable TOD 2...and so on. When you print the RLI, you'll see TOD 1 OFF if it's disabled
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jimc35
  • Locked
  • Question
Outing trunk data for a PRI
Replies
4
Views
21
bignose21
bignose21
toolbox212121
  • Locked
  • Question
OUTing a LDID
Replies
2
Views
17
GHTROUT
GHTROUT
Electricom
  • Locked
  • Question
How to make Option 11C stop outing analog phones due to infrequent use
Replies
7
Views
22
Triton101
Triton101
Merkery
  • Locked
  • Question
Removing (outing?) an IP phone 1
Replies
8
Views
26
Merkery
Merkery
keefbeef
  • Locked
  • Question
Outing using Procomm Script
Replies
6
Views
46
Firebird Scrambler
Firebird Scrambler

Part and Inventory Search

Sponsor

Back
Top