Outgoing Number via SIP on Gamma

[pcollins2013]

I seem to be going round in circles with this one.

I am trying to get two phones in a hunt group to display a DDI number when marking outbound calls.

Anybody have any pointers of Doc's on how to do this please

 

[jamie77]

put number in users SIP tab and set outgoing URI to use internal data.

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer

 

[pcollins2013]

Thanks for the detail. I have already set the number in the users sip. Where would i find outgoing URI

 

[jamie77]

In your SIP line

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer

 

[pcollins2013]

that's what i thought but can't find it in there

 

[tlpeter]

Outgoing URI can be done by programming the URI's on the SIP trunk, it has a tab called SIP URI.
In there give each URI there own outgoing line group ID which can be used in the ARS.
Although it is possible i would try to avoid these kind of constructions as this is beyond the basics.

BAZINGA!

I'm not insane, my mother had me tested!