Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outgoing Number via SIP on Gamma

Status
Not open for further replies.

pcollins2013

IS-IT--Management
Sep 17, 2012
5
GB
I seem to be going round in circles with this one.

I am trying to get two phones in a hunt group to display a DDI number when marking outbound calls.

Anybody have any pointers of Doc's on how to do this please
 
put number in users SIP tab and set outgoing URI to use internal data.

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
 
Thanks for the detail. I have already set the number in the users sip. Where would i find outgoing URI
 
In your SIP line

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
 
Outgoing URI can be done by programming the URI's on the SIP trunk, it has a tab called SIP URI.
In there give each URI there own outgoing line group ID which can be used in the ARS.
Although it is possible i would try to avoid these kind of constructions as this is beyond the basics.

BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top