Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outgoing Caller ID

Status
Not open for further replies.

SMMC

Technical User
Nov 13, 2002
61
US
I have an Opt51 running VERSION 2421 RELEASE 3 ISSUE 00 +
Can't get outgoing caller id to show up correctly. Calls going out over a PRI with d-channnel. Telco says everyhting is good on the PRI and DCH. Where to start? Thanks
 
turn on MSGO on the Dch in 96 and see (verify CLID is leaving) what is going out. If it is go back on Telco

Mato' Was'aka
 
I see this among other things, want to see the business name and area code also.

DCH 0 UIPE_OMSG CC_SETUP_REQ REF 000020C4 CH 14 19 TOD 14:54:04 CK EC804557
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:8974800 NUM PLAN: E164 TON: LOCL
CALLED #:8420552 NUM PLAN: E164 TON: LOCL
 
The Name of your business is definately provided by Telco ss7, it is not confgured on your pbx.

Mato' Was'aka
 
The company name is never shown on your outgoing pri members. Only the number of your company or the number of the set who is calling.
 
Your wrong. Depends on where your PRIs are provided from and what you want on them from the C.O.

Mato' Was'aka
 
bigindian65

Here in europe we don't use that feature, but can you tell me where to program it.

tnx ,

WKaal
 
Alright then, I gotcha, didn't know your Geo Area. The local Telco provides this service in the U.S.

Mato' Was'aka
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top