Hi All!
I already posted this question a week ago and tried the advice obtained from some good friends over here but still not working.
It is about accessing 9 from DID extension and Non-DID extension. If i use DID extension and dial outgoing 9 from there, it should get DOD (Route 11). However, if i use Non-DID extension and access 9 from it, i should get Analog trunks (Route 1). The current configurations below:
Outside access code = 9
TGAR in both DID and Non-DID extension = TGAR 14
1. Route 1 (Analog trunks) TARG 01 02 03 04 05 06 07 08 09 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
2. Route 11 (DOD) TARG 01 02 03 04 05 13 14
Base from the above, what would be my TGAR in DID and Non-DID extensions? If there's a need to reconfigure my RDB, what would be the right one?
Thanks,
Angelo
I already posted this question a week ago and tried the advice obtained from some good friends over here but still not working.
It is about accessing 9 from DID extension and Non-DID extension. If i use DID extension and dial outgoing 9 from there, it should get DOD (Route 11). However, if i use Non-DID extension and access 9 from it, i should get Analog trunks (Route 1). The current configurations below:
Outside access code = 9
TGAR in both DID and Non-DID extension = TGAR 14
1. Route 1 (Analog trunks) TARG 01 02 03 04 05 06 07 08 09 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
2. Route 11 (DOD) TARG 01 02 03 04 05 13 14
Base from the above, what would be my TGAR in DID and Non-DID extensions? If there's a need to reconfigure my RDB, what would be the right one?
Thanks,
Angelo