Outgoing Call Setting With PRI Trunk

[dd2maker]

I added 1 of VZ PRI into my IPOffice v2 and would like to set it up this way: all incoming calls following the sequence from channel 1 to 23 and outgoing calls is in another way from 23 to 1. with current version of the system, the choice for "channel allocation" is either "1 > 23" or "23 > 1". there is no dedicated setting for order of "outbound" or "inbound".

 

[derfloh]

Inbound is done by the line provider on it's side. You can't control that.

 

[dd2maker]

which means inbound calls is going to be 1 -> 23 by default?

 

[mojoputter]

Your T1 provider can change it to however you want, it appears that they have it setup to come in 1-23. That is the normal flow of calls from the T1 provider unless you are requesting a change

 

[dd2maker]

I re-configured setting of PRI and monitored it this morning. it looks OK so far. will keep tracking. thanks, everyone here.

 

[joe2938]

It's good for inbound to come in from the top and all outbound from the bottom up, this comes in handy for troubleshooting purposes