Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Outcalling SIP Trunks
- Thread starter djuplift
- Start date
Not without a license.
Provider?
IPO version/typ?
Start reading this;
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
Provider?
IPO version/typ?
Start reading this;
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
- Thread starter
- #3
Then use this link;
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
- Thread starter
- #5
- Thread starter
- #6
- Thread starter
- #7
techmoderick
MIS
how did you get this working, im having the exact same issue with the same provider?
- Thread starter
- #9
1. I created a second SIP URI on the same SIP line.
2. I Set the local URI, Contact and Display name settings on the new URI to "Use Authentication Name".
3. Gave the URI a unique line group ID I used 25.
4. Created a new Short code for dialing out the new URI:
Code: 7N;
Feature: Dial
Telephone Number: N"@bwas4.global.voip.mcleodusa.net"
Line Group ID: 25
5. Set the out calling feature up to use the new short code instead of the default 9N or w/e yours is.
You can monitor the outcalling in the voicemail client under voicemail queues and watch your active calls with SSA, when you test i would recommend doing both.
ACA - Implement IP Office
ACS - Implement IP Office
ACSS - SMEC (IP Office)
Juniper - JNCIA-FWV
Convergence+
2. I Set the local URI, Contact and Display name settings on the new URI to "Use Authentication Name".
3. Gave the URI a unique line group ID I used 25.
4. Created a new Short code for dialing out the new URI:
Code: 7N;
Feature: Dial
Telephone Number: N"@bwas4.global.voip.mcleodusa.net"
Line Group ID: 25
5. Set the out calling feature up to use the new short code instead of the default 9N or w/e yours is.
You can monitor the outcalling in the voicemail client under voicemail queues and watch your active calls with SSA, when you test i would recommend doing both.
ACA - Implement IP Office
ACS - Implement IP Office
ACSS - SMEC (IP Office)
Juniper - JNCIA-FWV
Convergence+
- Thread starter
- #10
- Status
Similar threads