Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

outcalling question to multiple numbers

Status
Not open for further replies.

teleconnect1

Programmer
Nov 22, 2010
52
US
hey guys,

quick question....

i need to setup outcalling to 3 pagers. is there a way to call all 3 pagers at one time?

I do have a callback start point for that mailbox, but can only call 1 pager? would i have to set this up in "outcalling"? or can i put all 3 numbers in the "sorce numbers" to call all 3 pagers?

ip500 5.0.26
VM PRO
 
I know you can escalate to other numbers and control the time for it calls so you can get it close to calling all 3 at once. . .

ACSS-SME
ACIS-SME
 
You can try to send it to a shortcode.
Make a shortcode like this:

*888
priority call
number of group with pagernumbers (can be virtual users that are forwarded)
Line id 0

A priority call will call all members and try to setup a conference.
It will not stop calling when someone picksup, it will try to contact all members.


BAZINGA!

I'm not insane, my mother had me tested!
 
Put 3 members in a hunt group, and all those members are set to unconditional forward. The numbers to forward are the pager numbers in each user.

point your call flow to that Hunt group
 
evco, that won't do it because he wants them all three at the same time.
a sequential or rotary group cannot do that.
And forwarding a group must be on sequential or rotary.


BAZINGA!

I'm not insane, my mother had me tested!
 
Mobile twining could enable you too call all 3 with a collective group but is it absolutely necessary?

if they are pagers is it possible to use SMS msg's to trigger them instead? if so you could use an email to sms gateway & email the alert via a group mailbox.



Computers are like Air conditioners:-
Both stop working when you open Windows
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top