Outbound PRI down, how to select analog lines for out traffice?

[surferdude949]

My PRI is down. I do have several analog lines. How can I program IP Office to use the analog lines for outbound traffic?

Here is the set up,

1 PRI (down)
8 analog trunks Out going group ID is 2.

Do I need to creat a new short code?

IPO 3.2

 

[surferdude949]

Ok I created a new short code,

[9]1N;
Dial 3k1
1N
Line Group Id 2

 

[Textron68]

I would suggest creating an ARS using Line Group 2 and setting it as an Alternate Route from the main ARS which uses the PRI. Then if the PRI fails, the outbound calls will automatically route to the analogs.

 

[surferdude949]

I'm running version 3.2 can you create an ARS in IP Office?