Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Outbound PRI down, how to select analog lines for out traffice?

Status
Not open for further replies.

surferdude949

Programmer
Oct 13, 2008
261
US
My PRI is down. I do have several analog lines. How can I program IP Office to use the analog lines for outbound traffic?

Here is the set up,

1 PRI (down)
8 analog trunks Out going group ID is 2.

Do I need to creat a new short code?

IPO 3.2
 
Ok I created a new short code,

[9]1N;
Dial 3k1
1N
Line Group Id 2
 
I would suggest creating an ARS using Line Group 2 and setting it as an Alternate Route from the main ARS which uses the PRI. Then if the PRI fails, the outbound calls will automatically route to the analogs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top