Outbound Name Display

[SPIDERMAN4]

I have a customer that wants to show ountbound name display(Name of Company).They have PRI and are Option 11 C Rls 3.
Number Outbound works fine with Clid 0 set up.
They do not currently use CPND (ld 95).
I know I can put name of company in LD 95 for every DN on system.
Is there a simpler way. The Central Office sending Name Is not an Option.

 

[jgideon]

If you're in the US, the only way to have a 'name' set up is to configure at the CO. In the US, number is 'sent' forward, but 'name' is retrieved using a database lookup between the carriers. Not all carriers are willing to pay to get the name, so not all names show. usually it's one name per account, but if you find the rigt person it is technically possible to do name per number within the same billing account.

 

[SPIDERMAN4]

This is in CANADA. As far as I know the carrier will not send out name . It is Customer's responsibility.(PBX)

 

[jgideon]

That's why I said 'if...'. Hopefully someone can tell you how to do it 'globally'. Good luck!