Outbound CallerID using DID's on BCM50 PRI 1

[CluelessITGuy]

I have a BCM 50 set up with DID's on inbound calls (coming over a PRI). Is it possible to use the DID number as a Caller ID on outbound calls across the PRI?

 

[hawks]

Set up the OLI for the extension as the DID number

 

[CluelessITGuy]

Worked like a charm on our BCM400; will now try it on our remote BCM50, expect it works the same. Thanks for your help.

 

[norstarboy125]

As long as you have a PRI you can program your OLI to display whatever you want.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[hawks]

norstarboy125, you need to make sure the carrier allows it. I have had some that would not allow you to outpulse a number that does not belong to you. They reject the call as invalid calling number.