Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

outbound caller id

Status
Not open for further replies.

chancal

Technical User
Oct 31, 2009
59
US
Hey guys,
I changed this a year ago, but cannot remember how i did it.
What load is that i can go in to play around with what shows up as the caller id when you dial out from a phone?
I remember it was a global setting too, meaning, i just had to change it in one place so that all the phones would send out their individual caller ids.

KEY 00 SCR 6722 0 MARP

i know it's the 0 at the end, but how do i go to change it?

thanks
 
LD 15 NET_DATA

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
It won't let me print. can i from here?
I recall being about to see the programming for 0 1 2 3 etc.
 
To print:

LD 21
REQ PRT
TYPE CLID

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
 
ok. 2 more questions
1) in LD 15 what OPT should i use to atart changing the HNTN and HLCL of a partcular entry?

2) what OPT should i use if i want all my phones to start using another entry?

thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top