Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Out bound caller ID

Status
Not open for further replies.
Toolhead2

Toolhead2

IS-IT--Management
Sep 20, 2010
65
US
Is there anything on a sub ICS that controls outbound DID or what the called party sees . I have a system that has shown in example. 212-xxx-1234. Now all out bound calls show 646-xxx- 4567. Yes we have 646 numbers but none are programmed .
 
Sort by date Sort by votes
That could be what the CO is sending. You could try going into each set and set the OLI -outgoing line identification - If that dosen't work you have to call the CO and have them Let you pass the CLID.
 
Upvote 0 Downvote
All my OLI are set , they have not changed.So your telling me other than that , this is a C.O issue ?
 
Upvote 0 Downvote
If you have a PRI and the system is not sending the OLI then yes call the CO to allow the system to send it.
 
Upvote 0 Downvote
Have you ever heard of a system that just stopped sending OLI ?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

flori1
  • Locked
  • Question
caller id
Replies
2
Views
238
curlycord
curlycord
Michael OConnor
  • Locked
  • Question
Caller ID Outputting weird characters
Replies
2
Views
312
Michael OConnor
Michael OConnor
accumatt
  • Locked
  • Question
Caller ID Not Working On Outbound Transfer Via Call Pilot 150
Replies
1
Views
294
accumatt
accumatt
trslater1
  • Locked
  • Question
911 out-dial access number
Replies
5
Views
850
curlycord
curlycord
Atechguyy
  • Locked
  • Question
NT8B88FA call ID C6 work On Norstar 3x8 dr.5 /5.1????????
Replies
6
Views
363
Atechguyy
Atechguyy

Part and Inventory Search

Sponsor

Back
Top