Where does the System User ID & Password come from??? When I click OK the Overlay Passthru as Connection Type, the System Login pops up with the System User ID & Password filled in. There is NOTHING in the customer/properties tab under Scheduler System ID (in Server or Client)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OTM Overlay PassThru
- Thread starter mojoagogo
- Start date
BMiles2000
MIS
It is under the system prperties and then customer properties tab. Good Luck!
- Thread starter
- #3
User ID is the name you use when you log in to your PBX for example ADMIN1. Password is probably the same password that you use to log into the PBX. User name comes after LOGI when you log into the PBX if you dont put anything after LOGI when you log into the PBX then you are not using log on names so put nothing in the User ID box and just put the password for the PBX.
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question